You don't choose between monthly and semiweekly deposits. The IRS assigns your schedule from your past tax liability. If you reported $50,000 or less in your lookback period, you deposit monthly, by the 15th of the following month. If you reported more than $50,000, you deposit semiweekly, on a Wednesday or Friday that depends on your payday. Both facts come from IRS Topic No. 757. Your pay frequency does not decide it.
This guide explains how the schedule is set, what the due dates look like, what the $100,000 next-day rule does, and where California adds its own layer for employers in Glendale, Burbank, Pasadena and the rest of Los Angeles County.
TL;DR
- Your schedule depends on the employment tax you reported in your lookback period, not on how often you run payroll.
- Monthly depositors pay by the 15th of the next month. Semiweekly depositors pay by the Wednesday or Friday after payday.
- Reaching $100,000 in liability on any single day means you must deposit by the next business day, whatever your schedule.
- California PIT and SDI deposits follow your federal schedule plus the amount of PIT withheld, so a federal fix alone is not enough.
- With EFTPS, start the payment by 8:00 p.m. ET the day before the due date.
Table of Contents
- How the IRS decides your schedule
- Monthly deposits: due dates and what they mean
- Semiweekly deposits: Wednesday and Friday
- The $100,000 next-day rule
- How to pay on time: the EFTPS day-before trap
- What late deposits cost
- California adds a second schedule
- A yearly check that keeps you compliant
- Our perspective
- Let us handle the deposits
- FAQ
- Sources
How the IRS decides your schedule
Before each calendar year, you determine which of the two schedules applies to you, as the IRS employment tax due dates page explains. The test is simple:
| Total tax reported in the lookback period | Your schedule for the year |
|---|---|
| $50,000 or less | Monthly |
| More than $50,000 | Semiweekly |
The tax counted is the liability reported on your Forms 941: withheld federal income tax plus both the employee and employer shares of Social Security and Medicare. It is not your gross payroll.
What the lookback period is
For Form 941 filers, the lookback period is the four quarters running from July 1 two years before to June 30 of the year before. Notice 931 shows it as a chart and gives a worked example: an employer that reported $45,000 across the four quarters ending June 30, 2026 is a monthly depositor for 2027, because the amount did not exceed $50,000.
That example matters right now. As of October 2026, the lookback period for your 2027 schedule has already closed. You can add up your Form 941 liability for July 2025 through June 2026 today and know your 2027 schedule before January arrives.
New employers
If you have never filed a Form 941, you are a monthly depositor for your first calendar year, unless the $100,000 rule applies, according to the IRS guidance on federal tax deposits. Many startups stay monthly for a while and then slip over the threshold as headcount grows. That is the point where deposits are most often missed.
Pay frequency does not matter
A common assumption is that weekly payroll means semiweekly deposits. It doesn't. A company with ten employees paid weekly can easily stay under $50,000 in lookback liability and remain a monthly depositor. A company paid once a month can exceed $50,000 and deposit semiweekly. The Form 941 instructions cover how to determine your schedule for each quarter.
Monthly deposits: due dates and what they mean
Monthly depositors deposit the taxes on payments made during a calendar month by the 15th day of the following month. Wages paid anywhere from March 1 to March 31 are deposited by April 15. If the 15th falls on a weekend or legal holiday, the deposit is due the next business day.
This schedule gives you the most room, but it takes discipline. Your liability accumulates all month, so the April 15 deposit can be large. Many owners set aside the withholding and the employer share in a separate account at each payroll so the money is not spent by mid-month.
Semiweekly deposits: Wednesday and Friday
Semiweekly depositors deposit based on the payday, not on a calendar month. The IRS due dates page gives the rule:
| Payday falls on | Deposit due by |
|---|---|
| Wednesday, Thursday or Friday | The following Wednesday |
| Saturday, Sunday, Monday or Tuesday | The following Friday |
If the due date is a weekend or legal holiday, the deposit moves to the next business day.
Worked example. You pay your team every Friday. Each Friday's liability is due the next Wednesday. If you also pay a Monday bonus, that liability is due on that Friday instead. A single week of payroll can therefore create two deposits on two different dates.

The IRS publishes a table of semiweekly due dates for the year in Publication 509. Many employers print it and post it near payroll.
Deposit schedule versus Form 941 deadline
The deposit schedule tells you when to pay. It does not change when you file the quarterly Form 941. They are two separate obligations: a perfectly timed deposit does not remove the need for the return, and a filed return does not make up for a late deposit.
The $100,000 next-day rule
The $100,000 Next-Day Deposit Rule applies to every employer. If you accumulate $100,000 or more in tax liability on any day, you must deposit it by the next business day. This overrides both schedules.
Two details trip people up:
- It counts a single day. Liability from different paydays is not added together for this test. It is the total that accumulates on one day, so a large bonus run or a final-pay run can trigger it even at a small company.
- A monthly depositor who hits it becomes semiweekly. Under the rule in Notice 931, a monthly depositor that reaches $100,000 becomes a semiweekly depositor for the rest of that year and the following year.
If your payroll can produce a one-day liability near that mark, for example in a bonus season or a sale of the business, plan the cash in advance. This guide on next-business-day deposit requirements explains how payroll teams can respond when liability reaches $100,000 in a day.
How to pay on time: the EFTPS day-before trap
Federal deposits are made electronically, most often through EFTPS. The detail that causes late penalties is the cutoff. To make the deposit on its due date, you must initiate it in EFTPS by 8:00 p.m. ET the day before the due date, as IRS Topic No. 757 states. Treating the due date as the payment date is the usual mistake.
For a monthly depositor on the 15th, that means starting the payment on the 14th. For a semiweekly depositor with a Wednesday due date, start by Tuesday evening. Since you pay from the West Coast, remember that 8:00 p.m. ET is 5:00 p.m. Pacific.
Practical habits that help:
- Schedule the payment a few business days early rather than on the cutoff.
- Use recurring or automatic payments where your liability is predictable, and review them every payroll.
- Put the due dates on a shared calendar, with the weekend and holiday shifts checked.
- Reconcile each deposit against the payroll register so amounts match what you reported.
What late deposits cost
The penalty depends on how late the deposit is. The IRS describes a graduated penalty of up to 15 percent for deposits more than 10 days late, in its Form 941 instructions. Interest accrues on top. Since the penalty is a percentage of the unpaid deposit, a large semiweekly deposit missed by a few days costs far more than a small monthly one.
California adds a second schedule
Federal compliance is half the job in California. The EDD states that how often you deposit State Disability Insurance (SDI) and California Personal Income Tax (PIT) depends on your federal deposit schedule and the total PIT you withheld. Unemployment Insurance (UI) and Employment Training Tax (ETT) are due quarterly, though you can pay them with your SDI and PIT deposits if you prefer.
The EDD's table shows how this works. For a next-day depositor, for example, accumulated PIT under $350 is deposited quarterly, and $350 to $400 is deposited monthly by the 15th of the following month. Amounts above that move to faster deposits tied to your federal schedule. Check the current table on the EDD page for your exact amounts and dates, since they change by year.
The lesson is that automating the federal side does not take care of California. A business can be perfectly on time with the IRS and still be late with the EDD because the two use different triggers. Our related guides cover the state side in more depth:
- California payroll taxes breakdown
- SDI withholding in California
- Avoiding 15% payroll penalties with deposit checks
- Our broader payroll tax deposit schedule explainer
A yearly check that keeps you compliant
The schedule is a compliance requirement based on history, and it can change from one year to the next. Use this short routine each fall, once the lookback period has closed on June 30:
- Add up your reported liability from the four 941 quarters from July 1 two years prior to June 30 of last year.
- Compare it with $50,000. At or below, you are monthly. Above, you are semiweekly.
- Compare against this year's schedule. If it changed, update your calendar, your bank reminders and your payroll software settings before January.
- Check your California status. Review your PIT withholding and your EDD deposit frequency against the federal result.
- Watch for the $100,000 day during bonus runs, commission payouts and final payrolls.
- Look for IRS notices. If the IRS thinks you used the wrong schedule, it can send a notice such as CP235, which tells you to review your deposit requirements.
Our perspective
In our work with small businesses in Glendale, Burbank, Pasadena and across Greater Los Angeles, the schedule itself is rarely the problem. The trouble is the handoff: a business grows past the $50,000 line, nobody updates the process, and the next deposit is made on the old monthly timetable. The IRS and the EDD give no credit for good intentions.
We treat deposit timing as part of payroll, not an afterthought for the accountant at year end. A dedicated payroll professional, not a call center agent, should know your schedule, your lookback total and your PIT level, and should notice when one of them is about to change. That is also why we start with a free payroll audit: it finds a mismatch between your federal schedule, your California deposits and your actual liability before a penalty notice does.
Our advice is plain. Calculate your lookback total every fall, schedule deposits a few days early, and never assume that a correct federal deposit means a correct California deposit.
— Glendale Payroll Staff
Let us handle the deposits
If you would rather not track lookback periods and cutoffs yourself, we handle payroll processing, federal and California payroll tax filing, direct deposit, W-2 preparation, new hire reporting and EDD account setup. Pricing is published: $105 per month per company, $12 per month per employee, and a one-time $100 setup fee. See everything included on our services page, or contact us through our site to book your free payroll audit.
FAQ
Can I choose to be a semiweekly depositor instead of monthly?
The schedule is set by your lookback liability, not by preference. You can always deposit earlier than your schedule requires, and doing so does not change your assigned schedule. What you cannot do is deposit later than the schedule allows.
What is the lookback period for a 2027 schedule?
For a Form 941 filer, it runs from July 1, 2025 to June 30, 2026. If you reported $50,000 or less in that window, you are a monthly depositor in 2027. If you reported more than $50,000, you are semiweekly, per Notice 931.
What happens if I reach $100,000 in one day as a monthly depositor?
You must deposit the full amount by the next business day. You also become a semiweekly depositor for the rest of that year and the following year. Check the rule in Notice 931 for how it applies to your quarter.
Does my California deposit schedule match my federal one?
Not exactly. The EDD bases PIT and SDI deposit frequency on your federal schedule and on how much PIT you withhold, so the two can differ in timing. Review the EDD deposit table each year.
Is the due date also the last day to start an EFTPS payment?
No. To have the deposit count on the due date, start it in EFTPS by 8:00 p.m. ET the day before. That is IRS guidance, and it is the most common reason on-time payers are marked late.
Sources
- IRS Topic No. 757, Forms 941 and 944 deposit requirements
- IRS employment tax due dates
- IRS Notice 931
- IRS: What are FTDs and why are they important?
- Instructions for Form 941
- IRS Publication 509, Tax Calendars
- IRS: Understanding your CP235 notice
- California EDD: Payroll Tax Deposits
